If something fails, you'll need this to recover. For me, this became part of my usual process and powering on the PC and letting it boot a little bit helped resolve that problem.Īlso, the first thing you should do once your drive is recognized by your PC is get your hard drive password.

I read online that if you power on the PC and let it get to the XboxHDM start screen and THEN connect the Xbox's drive, it will work. For me, the PC I used had this problem and it was a big pain figuring it out. Now, some old PCs do something weird (I don't know the technical reason) where you won't be able to interact with the hard drive even if your drive is unlocked and even if you timed the hotswap correctly. Make sure your Xbox drive is going to show up as primary master on your PC. Try to be fast when switching IDE cables. Pull the IDE cable out of your Xbox drive as soon as the 'Microsoft' text appears at the bottom on the startup screen. On your PC, burn XboxHDM 1.9 (including softmod files) to a CD and make sure your PC boots to the disc before trying to hotswap. Your flash drive should now be ready for use with Xplorer360 and with your Xbox (if it is compatible with the Xbox).Timing is important and it may take a few tries to get it right. Click 'Yes' on the following pop-up and then you should get a message confirming a successful format. exe and selecting 'Run as administrator.' Select your flash drive again in the 'USB Device' box, then click on the 'Quick Format USB' button. Now open USB FATX Formatter again by right clicking on the. You can now close USB FATX Formatter (there's a chance that it may still be open in the taskbar even after closing the program, so make sure to check and close it if it's still there). You should then get a message confirming a successful format. Select 'Cancel.' Right click on the USB FATX Formatter v1.3.2.exe file and select 'Run as administrator.' In the 'USB Device' box, select your flash drive, then click on the 'Format USB' button and select 'Yes' in the following pop-up. Now reinsert your flash drive and Windows should prompt you to format it. If you did this correctly, your flash drive will now be corrupted.

Right click on it and select 'Format.' Uncheck the 'Quick Format' button and then click 'Start.' As soon as you see the green progress bar appear, remove your flash drive. To do so, insert your flash drive into your Windows PC. You can use a program called USB FATX Formatter to format the usb first, then use FatXplorer to add files.

Usb fatx formatter v1.3.2 download